Opis
Aquatys Stiletto 2 Black PP-TPE, Black Idroglider is a compact back-up knife designed for diving, freediving, and spearfishing. This practical tool is suitable both for diving expeditions and for tasks on land. It has been designed to be mounted on diving equipment as a spare safety tool for quick use underwater.The knife is made from W 1.4060 nitrogen-enriched stainless steel, which provides excellent corrosion resistance, durability, and high cutting performance. The PP + TPE handle ensures low weight, moisture resistance, and a secure grip in a wet hand or diving glove.Thanks to its design, Aquatys Stiletto 2 is an essential piece of equipment for every diving expedition, especially as a back-up knife for quickly cutting ropes, straps, or other obstacles underwater.
1.4060 (MA5 / X35Cr16N) is a martensitic nitrogen stainless steel with high hardness and very good corrosion resistance. This grade is similar to X46Cr13 steel, but thanks to the addition of nitrogen it offers a favorable combination of hardness, strength, and corrosion resistance. After proper heat treatment, MA5 / X35Cr16N / 1.4060 steel can reach a hardness of up to approximately 60 HRC, while maintaining high resistance to moisture and marine environments.
Regular maintenance of 1.4060 stainless steel (MA5 / X35Cr16N) prevents the formation of deposits and maintains its luster. It also facilitates the removal of spots and tarnishes. Cleaning should be done before there is a visible layer of dirt or fingerprints, so the danger of permanent discoloration of the steel surface is minimized. For cleaning, do not use agents that contain: chlorine, salt, acids and bleach.
Blade – the Dagger blade offers very good cutting properties and features a Flat Grind. The spine of the blade is equipped with a fully serrated edge, with a short smooth section of a few millimetres near the tip.The unique serrated edge consists alternately of one large tooth and three smaller teeth, creating the so-called three-step pattern. This geometry increases the length of the cutting edge by up to 24% compared with a plain edge.This solution performs particularly well during intensive cutting of hard materials, plastics, and fibrous materials such as ropes or nets. The blade is coated with a scratch-resistant, non-reflective Idroglider Gold® Black finish.The blade should be washed in fresh water and lubricated after each use.
Handle – black, covered with non-slip, textured scales with rubber-like properties. The scales are made from thermoplastic elastomer, also known as thermoplastic rubber TPE, combined with PP polymer. This material ensures a secure grip in aquatic environments, even with a wet hand or while wearing a diving glove.The ergonomic shape of the scales reduces the risk of the hand slipping during use. The handle butt is finished with an Integrated Steel Hammer Pommel.
Sheath – made from ABS plastic, with openings that allow water and moisture to drain away. It is equipped with a locking latch that prevents the knife from accidentally slipping out during diving. The holster comes with two rubber straps and two plastic buckles, allowing the knife to be mounted on the arm, leg, or diving vest.
Technical Data:
Product number: AQT12D-2.N
Product name: Aquatys Stiletto 2 Black PP-TPE, Black Idroglider
Overall length: 240.0 mm / 9.44″
Blade length: 120.0 mm / 4.72″
Blade thickness: 3.8 mm / 0.149″
Handle length: N/A
Handle thickness: N/A
Weight: 154.0 g / 5.43 oz
Blade material: Nitrogen Stainless Steel – W 1.4060
Blade hardness: 56–58 HRC
Blade grind: Flat
Blade finish: Idroglider Gold® Black
Handle material: PP with TPE
Handle finish color: Black
Sheath / holster: ABS
Additional accessories: 2 straps and 2 buckles
Designer: MAC
Brand: MAC Coltellerie
Manufacturer: MAC Coltellerie
Country of origin: Italy
Prepared by: Sharg®
